A calibrated six-color IP65 wash built for production, rental, venues, and projects where true color matters.
Powered by Rasha CHROMIND
Rodie X12 is powered by CHROMIND, a calibrated light engine developed by Rasha. Red, green, blue, amber, cyan, and lime LEDs work with an integrated control chip designed to manage their output for precise color mixing.
Light source: 12 RGBACL LEDs, each containing red, green, blue, amber, cyan, and lime emitters.
One of CHROMIND’s six color channels. Select a channel to explore the RGBACL configuration.
RGBACL engine diagram. Screen colors are illustrative, not measured output.
See Rodie’s six-color engine in action, with front and rear product views and a sequence of individual colors.
Actual fixture footage. Camera settings affect the appearance of color and brightness.
Explore Rodie X12 from every angle.
Switch from saturated color to calibrated white with one fixture. Select from 83 white-light presets spanning 1,800K to 10,000K.
The white-light results above apply to the calibrated presets. Setting red, green, blue, amber, cyan, and lime to 255 produces an uncalibrated full-output mix. Rasha’s manual reports approximately 11,190K and CRI 80.1 for that condition; those values do not describe the calibrated white presets.
Technical results shown here apply to Rev B fixtures, firmware V2.2 and later, within the manual’s stated serial-number range.
Explore the CCT range. Screen colors are illustrative; measured results are listed above.
Rotate the fixture, inspect the twelve-lens array, and explore the color sequence. Select a black or white finish.
Light source: 12 RGBACL LEDs, each containing red, green, blue, amber, cyan, and lime emitters.
Rendered animation. Colors are illustrative. Watch the actual fixture.
A 10 lb die-cast aluminum housing, passive cooling, and professional mounting hardware make Rodie practical for truss, floor packages, and venue installations.
See how the round front bezel, protective glass, twelve-lens array, and light-engine board fit together inside the housing.
Exploded CAD visualization of the optical assembly. Not a service procedure.
Explore the rear panel, from the onboard display to the DMX and power connections.
A black-and-white OLED display and four buttons put setup at the fixture. MENU opens or goes back, UP/DOWN navigate or adjust, and ENTER selects or saves.
Set the DMX address, choose a channel mode, and move through the menu on the black-and-white OLED display. This walkthrough follows the firmware 2.2 menu instructions.
26-second animated demonstration. Hand and screen graphics are illustrative.
Use Rodie X12 to shape a stage wash, light a performer, or build a venue look. CHROMIND combines six-color mixing with tunable white, while the fixed 25° wash gives you a defined beam angle for planning coverage.
Use saturated washes, pastels, and tunable white across your lighting cues. Test Rodie on costumes and scenery, check coverage at your working distance, and evaluate the control setup with your crew.
Tell us what you light, where you work, and what you need from your next wash fixture. Talk with Rasha about a demonstration, project requirements, or a quote.
Copyright © 2026 Rasha Professional. All Rights Reserved