Six-Color LED Wash Lights Compared: How the Rodie X12 Stacks Up Against the Class

Quick answer: Among five comparable wash fixtures, the Rodie X12 pairs a six-color RGBACL engine (red, green, blue, amber, cyan, lime) with a 25 degree beam that ties for the widest in the group, an IP65 housing, the lowest peak power draw at 105W (0.87A), and the lowest weight of the six-color fixtures at 10 lb. Its sixth emitter is cyan, not UV, so it mixes turquoise, teal and pastels instead of effect color.

Key takeaways

• Six colors is the standard at this level, not the differentiator. What matters is which six. The Rodie X12 spends its extra emitters on amber, cyan and lime.

• Cyan is a mixing color. UV is an effect color. Cyan extends a wash into turquoise and teal; UV does not help a wash hit the color a client asked for.

• 25 degrees is a wash beam. It covers more than three times the area of an 11 to 14 degree PAR at the same throw.

• The numbers compound. Forty Rodie X12s draw 34.8A at peak at 120V, against 60.8A for forty of the closest six-color match.

• Built for load-in. Quick-release omega brackets, an M10 yoke hole, passive cooling and ten pounds per fixture.

Which wash lights are in this comparison?

We compared the Rodie X12 with five wash fixtures that rental houses, production companies and venues commonly weigh against it. Rather than compare brand against brand, we grouped them the way a lighting designer thinks about them: by color engine.

• Same six colors (cyan and lime): one fixture with the identical RGBACL emitter set, LED count, beam angle and IP rating. The closest like-for-like comparison.

• Six colors with UV: two fixtures that spend their extra emitters on white or lime plus UV.

• Four-color RGBW: two fixtures built on red, green, blue and white.

Every competitor figure below comes from the manufacturer's own published specifications, verified in July 2026. Where a manufacturer does not publish a figure, we leave it out rather than estimate it.

Six-color LED wash light comparison table

Is a six-color engine enough to set a wash light apart?

No. At this level, six colors is where the conversation starts. The closest fixture in this comparison carries the same six emitters, the same LED count, the same beam angle and the same IP rating as the Rodie X12. Two others also run six colors. Anyone selling on emitter count alone is selling something the buyer already knows is common.

The questions that separate one six-color wash from another are more specific: which six colors, what the fixture does with them on a lighting console, how it hangs, and what it costs a rig in power and weight once it is multiplied across a full order.

Cyan vs. UV: which sixth color matters in a wash light?

For a color wash, cyan. Of the four six-color fixtures in this comparison, only two spend the sixth emitter on cyan, and the Rodie X12 is one of them. The other two spend it on UV.

• Cyan sits between green and blue. It extends the wash into turquoise and teal, and it gives the engine another source to build the in-between shades clients ask for.

• Lime fills the greens and the white. Together with amber, it pushes the output toward the fuller spectrum of daylight.

• UV is an effect emitter. It has its place in a show, but it is not a mixing color for a stage wash.

The practical difference shows up in the requests your crew hears every week. Clients are asking for pastels, and they expect you to match the color. Those harder, in-between shades are reached by an engine with a broader spectrum of color to work with.

What you move on the screen is what you see in the real world

On a lighting console, an operator picks a color from the color picker, and too often what comes out of the fixture is not what was picked. Those color spaces were built for digital screens, and lighting hardware has spent years trying to reproduce them.

That gap is the reason the Rodie X12 exists. Twelve LEDs, each one carrying all six colors, give your console's color picker a wider range of real emitters to draw on. The intent was always this: open the color picker on your console, pick a color, and get that color on the stage.

This fixture doesn't guess. What you build on the console is what lands on the stage.

The same engine builds the white. Daylight is not just a color temperature; it is a whole spectrum of wavelengths at once. The Rodie X12 makes its white with all six emitters working together, built on your console like any other color, and you push the white point warmer or colder right off the color picker. One engine gives you a color wash and a clean white key light.

How does a 25-degree wash compare with narrow-beam PARs?

A 25-degree beam covers more than three times the area of a 14-degree beam at the same distance. At 25 degrees, the Rodie X12 shares the widest beam in this comparison; the four-color fixtures run 11 to 14.1 degrees.

That matters when you read spec sheets. Lux measures how concentrated a beam is as much as how much light a fixture makes, so a narrow beam reads higher on a lux meter at the same throw. A lux figure from an 11-degree fixture tells you very little about how a 25-degree wash will cover a stage. For a wash light, compare coverage first.

How much power and weight does a full rig of wash lights add up to?

Nobody buys one wash light. Rental houses restock in twelves and forties, and venues fill a room. Every per-fixture number in a spec sheet gets multiplied, so it pays to do that math before the order rather than at load-in.

At 105W and under an amp at peak, the Rodie X12 has the lowest peak power draw of every fixture in this comparison, and at 10 lb it is the lightest of the six-color fixtures. Lower draw means fewer circuits, less distro and a smaller generator load on outdoor jobs. Lower weight means less on the truss and less on the crew.

For linking, the Rodie X12 is rated for 13A of pass-through at 120V and 10A at 240V, through locking IP65 power in and through. Plan your runs from that capacity and your local electrical code.

How does the Rodie X12 rig?

Rigging is what a crew feels on every load-in, so it belongs in any comparison.

• Heavy-duty, pressure-locking yoke. Aim it once and it stays.

• Two quarter-turn omega slots at 108 mm, the same spacing as the Rasha Bullet Bar, so existing Rasha customers reuse the brackets they already own.

• Quick-release for fast hangs and faster strikes.

• An M10 hole in the yoke arm for crews running their own clamps.

• A rear safety cable loop as the anchor point for your safety.

• Die-cast aluminum, passive cooling, no fans to clog or fail.

• Locking IP65 power, input and through, and 5-pin DMX with RDM, input and through. Round out the order with matching power cables and DMX cables.

Where does the Rodie X12 fit best?

Anything you would normally do with a PAR, the Rodie X12 does, with the color engine behind it.

• Stage color wash from truss for concerts, events and stage productions.

• Key light on a performer or a camera subject, from the same engine that runs the color wash.

• Theater front, top and side wash. See our guide to LED wash lights for theater and theater lighting.

• Venues filling a room in quantity, including houses of worship and clubs and venues. Indoor permanent installation is fine. Planning a worship upgrade? Read the church lighting upgrade guide.

• Uplight from the deck, side and hair light, and floor packages with the band.

• Semi-permanent outdoor rental: an amphitheater wash for the summer season, a holiday building wash, a festival or concert series, a seasonal attraction. Any outdoor job with an end date on it.

Buying for a rental inventory? See how rental companies increase ROI with modern fixtures.

What should you ask before buying wash lights in quantity?

1. Which six colors? Check whether the extra emitters are mixing colors like cyan and lime or effect colors like UV.

2. Does the color on the console match the color on the stage? Pick a pastel on your console's color picker during a demo and look at it on your own materials.

3. What is the beam angle? Compare coverage at your throw distance before comparing lux.

4. What does forty of them draw? Multiply peak amps by your order and check it against your circuits and generators.

5. What does forty of them weigh? Multiply again for truss loading and crew handling.

6. How fast does it hang and strike? Look for quick-release omega brackets, a clamp hole and a safety anchor point.

The fastest way to answer all six is to put the fixture in front of your team. Book a Rodie X12 demo.

See the Rodie X12 for yourself

Your client asks for a color, and your rig gives them that color. Built for the rental houses and the venues that light a stage every week.

Explore the Rodie X12 | Book a demo | Contact our team

Dealers and resellers: see the Rodie X12 for professional lighting resellers or apply to the Rasha reseller program. Datasheets and manuals are in Rasha product resources, and coverage details are on our warranty page.

Call (951) 654-3585 or email sales@rashaprofessional.com. Rasha Professional, 1800 Rustin Ave., Riverside, CA 92507.